PROJECT MANAGER – OPERATIONS AND MAINTENANCE
(JD-PM-OM)
Bachelor Degree in Electrical / Electronic Engr, 10
yrs managerial experience in the project management
of O&M projects of big facilities like industrial
plants, hospitals, airports or housing complexes.
Fluent in English and well conversant in resource
management, procurement and material management with valid driver’s license
TELECOM ENGINEER (JD-TE-OM)
Graduate in Electronics and Comm. Engineering with 5
yrs of exp. in operation and maintenance of telecom
systems such as DPBX telephone system, CATV / CCTV
and radio communication system. Shall have
experience in FTTH distribution network.
HV FOREMAN (JD-HVF-OM)
Diploma, 5 yrs exp. in operations and maintenance of
electrical equipment such as HV/LV switchgear,
transformers, diesel generators, MCC, circuit
breakers, cables, relays and AC/DC panel boards.
ELECTRICAL TECHNICIAN (JD-ELT-OM)
Diploma, 3 yrs exp. in operations and maintenance of
electrical equipment such as HV/LV switchgear,
transformers, diesel generators, MCC, circuit
breakers, cables, relays and AC/DC panel boards.
IPTV TECHNICIAN (JD-IPT-OM)
Diploma in Electronics or Instrumentation, 5 yrs
exp. with installation, O&M of IPTV systems. Should
be familiar with the FTTH distribution network and
equipment such as OLT, ONT, and FDT.
TELECOM INSPECTOR (JD-TI-OM)
Graduate in Electronics and Comm. Engineering with 5
yrs of exp. in O&M of telecom systems such as DPBX
telephone system, CATV / CCTV and radio
communication system. Shall have experience in FTTH
distribution network.
ELECTRICAL INSPECTOR (JD-EI-OM)
Electrical Engr, min 5yrs exp. in O&M of MV/LV
electrical systems including switchgear,
transformers, motors, MCC, circuit breakers, cables,
relays and AC/DC panel boards.
ELECTRONIC (RADIO) TECHNICIAN (JD-RT-OM)
Diploma in Electronics or Instrumentation, 5 yrs
exp. with maintenance of UHF radio repeaters,
analog/digital radios, antenna systems, Radio Paging
systems, Emergency services system and related radio
equipment.
PREVENTATIVE MAINTENANCE INSPECTION FOREMAN
(JD-PMI-OM)
Diploma in Electrical or Mechanical Tech, minimum 4
yrs exp. in operation, inspection , preventive
maintenance and trouble shooting of generators, ATS,
cranes, forklifts and workshop equipment.
CUSTOMER SERVICES COORDINATOR (JD-CSC-OM)
Min Diploma in management, 5 yrs of exp. in a
services organization, working directly and dealing
with the public/government. Fluency in English is
must.
PROJECT MANAGER – ELECTRICAL CONSTRUCTION
(JD-PM-CNST)
Bachelor Degree in Electrical / Electronic Engr,
plus 10 yrs managerial experience in the project
management of EPC electrical construction projects
of distribution substations, protection and
electrical upgrade projects, distribution networks
and associated cabling. Fluent in English and well
conversant in resources management, procurement and
material management.
SITE ELECTRICAL ENGINEER – ELECTRICAL CONSTRUCTION (JD-SEE-CNST)
Bachelor Degree in Electrical / Electronic Engr, 5
yrs site experience in EPC electrical construction
projects of distribution substations, protection and
electrical upgrade projects, distribution networks
and associated cabling. Must be familiar with
equipment installation activities.
SITE CIVIL ENGINEER – CIVIL CONSTRUCTION
(JD-SCE-CNST)
Bachelor Degree in Civil / Structural Engr, 5 yrs
site experience in civil construction projects
related to distribution substations. Must be
familiar with civil with civil site activities such
as foundation construction and erection, reinforced
concrete duct bank construction, equipment
foundation pads, etc.
ELECTRICAL QA/QC ENGINEER (JD-EQAC-CNST)
Graduate in Electrical Engr, 5 yrs experience in
performing QA/QC inspections of during the
installation and commissioning phase of MV/LV
electrical systems including systems including
switchgear, transformers, motors, MCC, circuit
breakers, cables and associated terminations and
jointing, relay installations and AC/DC panel
boards. Shall be responsible for inspecting
electrical construction and erection activities as
well as coordinating with subcontractors and
inspecting subcontracted electrical activities.
CIVIL QA/QC ENGINEER (JD-CQAC-CNST)
Bachelor Degree in Civil / Structural Engr, 5 yrs
site experience in performing inspections during the
civil construction of phase of projects related to
distribution substations. Must be familiar with
civil with civil site activities such as foundation
construction and erection, reinforced concrete duct
bank construction, equipment foundation pads, etc.
EQUIPMENT INSTALLATION TECHNICIAN – ELECTRICAL
CONSTRUCTION (JD-EIT-CNST)
Diploma in Electrical or Mechanical Tech with min of
3 yrs experience in erection of HV/LV electrical
systems including switchgear, transformers, DC
Battery Systems, MCC and AC/DC panel board. Exp in
the erection of electrical substation equipment and
in installation steps and activities for electrical
equipment. Must be able to read electro mechanical
and equipment layout drawings.
STRUCTURED CABLING TECHNICIAN – ELECTRICAL
CONSTRUCTION (JD-SCT-CNST)
Diploma in Electrical or Mechanical Tech with min of
3 yrs experience in installing structured cabling
systems such as cable trays, cable ladders, rigid
and EMT conduit, junction and pull boxes etc for LV,
instrumentation and communication networks such as
control cables, lighting circuits, power
receptacles, low level signal equipment, RJ45 and
fiber optic cables, etc. Must be able to read
electro mechanical and equipment layout drawings.
CABLE TERMINATION TECHNICIAN – ELECTRICAL
CONSTRUCTION (JD-CTT-CNST)
Diploma in Electrical Tech with min of 3 yrs
experience in carrying out cable termination and
jointing works for LV and MV power cables (upto
36kv, XLPE, armored and unarmored). Candidate must
be familiar with different cable types, termination
and jointing techniques using heat or cold shrink
and have SEC or Saudi Aramco certification from
other GCC municipal authority.
GENERAL FABRICATOR – ELECTRICAL CONSTRUCTION
(JD-GF-CNST)
Diploma in Mechanical Tech with min of 3 yrs
experience in industrial fabrication including but
not limited to angle iron supports, equipment steel
bases, steel rack and supports. Candidate must have
fabrication experience in welding (MIG, MMA),
cutting grinding and bending of various steel
profiles, rebar bending and cutting, conduit bending
and threading, etc. must be able to read and
generate mechanical fabrication drawings as
required.
All candidates must put the applicable job code
(JD-XXX-XXXX) for the position in the subject line
of their email otherwise submitted CVs will not be
accepted
Interested applicants with Transferable Iqama should
send their resume to the following email:
Email: engineersjobs25@gmail.com
Within 3 days from the date of this advertisement